Assembly Instruction - HMS BE5833 Manual

Assembly instruction

Step 1 Take out the machine from box and put it on the flat floor.
(As shown),remove all PE bags and bags wrapped on the machine
Step 2 Fold the machine up to make sure the
Ezfit linking part 7 fixed stably . Take out the left
and right upright post, and use 4pcs Allen
C.K.S.half thread screw M8*50*20 to lock from
the inside to outside. Use 2pcs Allen C.K.S. full
thread screw M8*15 to lock from top to
bottom.
Step 3 Press the Ezfit linking part 7 to lay flat the
running deck, take out he console group and
assembly it is above. After aligning the hole
position on the top of uproght post, use 4 pcs.
Allen C.K.S. screw M8*20 to lock it from inside to
outside.