Detailed Instruction - HMS BE8535 Manual Instruction

DETAILED INSTRUCTION

Quick start (for manual mode)
➢
Turn on power switch, Put safe key in the right position.
➢ Press"START" button, the system will count down in 3 seconds, which displays on the screen. After
countdown,the machine will run at the speed of 1.0km/h.
➢ According to your needs, press"SPEED △ or ▽" to change speed and press "INCLINE △
or ▽" to change incline.
➢
When you put your hands on hand heart rate sensors for 5-8 seconds, heart rate will be displayed on the
screen.
Manual mode:
➢
Under ready condition, Press " Start " Key, the machine will run at the speed of 1.0km/h and incline 0%.The
other window will forward count from 0. Press"INCLINE direct key、"SPEED direct key"、 "INCLINE△"、
"INCLINE▽"、"SPEED+"、 "SPEED-",you could change speed and incline.
➢ Under ready condition,press "MODE" to come into time countdown mode. Window "Time" displays "30：00"
and shining,you could press "SPEED+"、 "SPEED-" to set exercise time from 5：00—99：00.
➢ When on distance countdown mode,press "MODE" to enter. Window " DIST" displays "1.0" and shining, you
could press "SPEED+"、 "SPEED-" to set exercise distance from 0.5—99.9.
➢ When on calorie countdown mode,press "MODE" to enter. Window " CAL" displays "50" and shining, you
could press "SPEED+"、 "SPEED-" to set calorie from 10—999.
➢ After finish setting time,distance or calorie mode,you could press " start " to start the machine. there will be 3
seconds countdown displayed on the window ! After countdown,the machine will run at the speed of 1.0km/h.
You could press "INCLINE△"、"INCLINE▽"、"SPEED+"、 "SPEED-" to adjust speed and incline. Press
"stop",the machine will stop slowly.
Count-down mode:
In ready condition, press "MODE" button to select countdown modes. After finish selection and reset
"Time/Distance/Calories", press "Start" button to start the machine!
➢ In "Time Mode", the screen displays flashing "15 ： 00". Then press "SPEED △ or ▽" or
"INCLINE △ or ▽" to reset time from 05：00—99：00.
➢ In "Distance Mode", the screen displays flashing "1.0". Then press "SPEED △ or ▽" or
"INCLINE △ or ▽" to reset distance from 0.5—99.9.
➢
In "Calories Mode", the screen displays flashing "50". Then press "SPEED △ or ▽" or
"INCLINE △ or ▽" to reset calories from 10—999.
Built-in program
There are 99 built-in programs, from P1 to P99. In ready condition, press "PROG." button to select one
program from P1-P99. After that, press "MODE" button to set time from 5：00—99：
00. Then press "START" button to start the machine.
Every built-in program is divided into 10 periods, each period lasts 1/10 of set time. During every period, press
"SPEED △ or ▽" to change speed and press "INCLINE △ or ▽" to change incline if necessary. From one
period to another, there will be a sound like "Bi" for 3 times, then speed and incline will be changed according to
built-in programs. After finishing one program, there will be a sound like "Bi" for 3 times, then the machine will
stop slowly and the screen will display "End". The machine will be in ready condition in 5 seconds.
User-defined program
➢
Besides 99 built-in programs, there are 3 user-defined programs for you to set your own exercise programs;
In ready condition, press "PROG." button continuously to U1-U3, they are user-defined programs. After
selecting U1, U2 or U3, press "MODE" to set. Press "SPEED △ or ▽" to change speed and press
"INCLINE △ or ▽" to change incline for the first period. Then press "MODE" key to confirm the first
period and set next period. After setting all 10 periods, press "START" button to start the machine.
User-defined programs will be kept in the machine forever unless you reset them. These data will not disappear if
power off.