Safety Guidelines - HMS BE5833 Manual

Keyboard operation instructions
"PROG"：Program selection key, stop state, loop selection programP1~P36，U01，U02，U03，FAT
"MODE" select key： When the treadmill is power on, set the Mode as you prefer to. You can cycle
select the Time countdown → calories countdown → distance countdown.
When you confirm the mode you choose, press the speed +/- to set the value you want, then press
start key. The treadmill countdown function is working.
"＋"：Speed pass key，
"－"：The speed decline key"
" The gradient incline key, the gradient addition in a running state.；
" "：The gradient decline key, in the running state, is the gradient decline key.；
Introduction to the conversion of km change to mile
1) unlocking the safety key and pressing the "program" and "mode" keys at the same time, the
display screen shows a 0.6 means conversion from km to mile;
2) unlocking the safety key and pressing the "program" and "mode" keys at the same time, the
display screen shows a 1. 0 means conversion from mile to kilometer;
Safety key function description
the safety key is made up of Copper insert, clamp and nylon rope. It has the function of emergency shutdown.
In any state, as long as the safety key is removed, the treadmill stops running, the console keyboard is disabled,
and the screen displays "E-07" with a prompt sound. Then put well the safety lock, the screen will appear for 2
seconds and then enter the default working state of the system (the equivalent of clearing reset).

Safety guidelines

1) Put the power cord into the electrical outlet with 10A. Flip this switch to the "ON" position. The screen
shines with prompt sound and then the safety key is recognized;
2) put the safety key in the position on the console, clip the safety key to the clothes in front of the chest, and
the screen will appear for 2 seconds and then enter default working mode. All the counters are zero, the set
value is reset, The treadmill is in the positive timing mode of the P0 Normal Mode;
3)Press "PROG" key to cycle select the program：P1~P36，U1,U2,U3, FAT;
4)"P1" is user program，Press "MODE" cycle select four training mode，User can select the speed and
inclination. Speed default is 1.0km/h, inclination default is 0%.
5)Training model 1:Positive counting of time, time, distance and calories. The select function is closed
6) Training model 2: Time Countdown, under selecting, time window flicker, press "+""-"to modify the
value. The range is 5-99 minute. Default is 30:00；
7) Training model 3: Calories Countdown. Under selecting, calories window flicker, press "+""-"to modify
the value. The range is 20-9990CAL.Default is 50CAL；
8) training mode 4: Distance Countdown. Under selecting, Distance window flicker, press "+""-"to modify
the value. The range is1.0-99.0km.Default is1.0KM.；