HMS BE5833 Manual page 31

Folding
1. Cut off the power when plan to fold the treadmill.
2. Check if the incline is in the lowest position.
3. Lift up the treadmill to the upright position, the E-zfit linking part will automatically stuck in
the cylinder.
Notice ! Check if the e-zfit linking part stuck on the cylinder!
Unfolding
1. When unfolding the treadmill, you should choose one place where around 1m away from the
power socket, and the ground is flat without any barriers.
2. Hold the treadmill with both hands and step on the e-z fit linking part, now the treadmill will
slowly down to the ground, and you should keep 1meter distance from the treadmill until the
treadmill unfolded completely.
Moving
First you need be sure following things before moving：the power is off, the plug has been pulled
out from the socket, the treadmill has been folded.
Using
1. Turn the power on , keep the treadmill spread out at its lowest position and check its function if
normal .
2. Clip the safety key cord with your clothes.
3. Ensure and check its function and stability before use .
Standing on the Running belt to get it started is not allowed.
The correct way to start is standing on side rails with hands on the handle bar. After normal working,
you can exercise with the treadmill.
Hold the handle bar when press the "START" key, the treadmill running at the speed of 1.0km/h
after 5 seconds. Then press "+ "Key to 2.5-3.5 km/h which is the comfort speed for running. Both of
hands are supposed to catch handle bar at the same time and feet step to the running belt
successively to start running. Running as quickly as running belt soon.
4.After several minutes, you can speed up by pressing "+"key or slow down by "-"key meanwhile
holding the hand bar 。
5.When running ,press speed value, you can enter into the fixed speed you want .
6.Pressing "stop" key to make the motor stop.
HRC testing：After the treadmill is powered on ,hold your hands on the metal pulse sensors ,then
you can see HRC value on the display window.
Notice ! When safety key pull out, the treadmill will stop immediately. And the computer can not
work, then window shows „__"