HMS BE5833 Manual page 32

Possible mistakes
Problem
Treadmill didn't work
The running belt doesn't run
smoothlu
Running belt slips
The key malfunction
Stop abruptly under normal
state
E1
E3
E4
E5
E6
No pulse
Console short of display
Reason
1. no power
2. safety key isn't in the right
position
3. broken circuit signall system
4. fuce burnt out
1. no enought lubrication
2. running belt i stoo tight
1. running belt i stoo loose
2. motor belt i stoo loose
1. boken panel
1. safety key drop out
2. broken system
1. connect wire loose or defected
1. motor wire lose or defercted or
controller defected
2. speed sensor not pull well or
defected
1. Incline motor induction wire is
not put well put
2. Incline motor AC wire not put
correctly
1. Overloading and some part
are locked
2. Motor and controller defected
3. Power and voltage is not
conformity or is too low.
1. Voltage is lower 50 ％ than
normal voltage.
2. Controller defected
3. Motor connect wire not put
well
1. Handle pulse wire did not
connect well or wire defected
2. Console circuitry defected
1. The screw on the PCB is loose
2. Console defected
Solution
1. plug into socket
2. replace the safety key
3. check the product
4. change the fuse
1. use the silicone oil
2. adjust the tightness of running belt
1. adjust the tightness of running belt
2. adjust the tightness of motor belt
1. change the key board and wire 2.
Change the mainboard 3. Change the
console
1. replace the safety key
2. ask serviceman to repair it
1. connect the wire well or change the
wire between console and controller
1. connect the motor wire well or
change the controller
2. put the soeed sensor well or change
the speed sensor
1. Put the induction wire well
2. AC wire match to the logo on the
controller
1. Adjust the treadmill and start it
again
2. Change the motor and controller
3. Test again for correct voltage.
1. Test again for correct voltage
2. Change the controller
3. Well put motor connect wire
1. Well connect the wire or
change the wire
2. Change the console
1. Tight well the screw
2. Change the console