HMS BE5833 Manual page 24

Step 4 Lift up the console, use 1pc TAB bolt to
fit it from the left side.
Step 5 Finally, check the machine screw is
locked. After all the screws are fastened, the
machine installation is completed！
Lubrication
The treadmill is factory-lubricated. However, it is recommended to check the lubrication of the
treadmill regularly, to ensure an optimal operation of the treadmill. It is usually not necessary to
lubricate the treadmill in the first year or the first 500 hours of operation.
After every 3 months of operation, lift the sides of the treadmill and feel the surface of the belt, as
far as possible. If traces of silicon spray are found, lubrication is not necessary.
In case of a dry surface refer to the following instructions. Only use oil free silicon spray.