Applicable Types Of Enclosure / Standards - ProMinent DULCOMETER D1CA Operating Instructions Manual

8

Applicable Types of Enclosure / Standards

8.1 Electric shock and moisture protection (IP)
D1C D: Device in installed condition: Type of enclosure DIN 40050 - IP 54
D1C W: Device in sealed housing type of enclosure IP 65 in accordance with DIN VDE 0470 corresponding
to EN 60529 and IEC 529
outer seal (control panel installation): type of enclosure IP 54 in accordance with DIN VDE 0470
corresponding to EN 60529 and IEC 529.
8.2 Electrical safety/interference suppression
EC low voltage guideline (73/23/EEC) consequently 93/44/EEC
EC EMC guideline (89/336/EEC) consequently 92/31/EEC being prepared
Supply voltage in accordance with DIN IEC 38
Electrical safety in accordance with EN 61010-1
Electromagnetic emitted interference in accordance with EN 55011 Gr. 1/Cl. B
Interference immunity in accordance with IEC 801-2, -3, -4 or DIN VDE 0843, Part 2, Part 3, Part 4 or EN
50082-2
EN 60335-1 Safety of electrical devices for household use
EN 50081-1 EMC, emitted interference, residential areas
EN 50082-2 EMC, emitted interference, industrial areas
EN 60555-2 EMC, reactions in power supply networks, harmonics
EN 60555-3 EMC, reactions in power supply networks, voltage fluctuations
8.3 Test in moist changeable climate
D1C D: Permissible relative humidity: max. 80 % (condensation not permitted)
WARNING
The device is not suitable for use in a moist changeable climate as there is no sealed
housing and constant exchange of air!
D1C W: Moist changeable climate in accordance with FW DIN 50016.
39