Wheel Securing Bolts: Tighten To Specified Torque - Volkswagen Touareg 2010 Manual

Touareg 2010 ➤
Maintenance - Edition 11.2011
– Air conditioner: Check function (at low temperatures the func‐
tion of air conditioner must be checked in a workshop)
– Vehicle: Pulling to one side when travelling straight-ahead
(level road)
– Imbalance: Wheels, drive shafts, propshaft
– Wheel bearings: Noises
– Engine: Hot starting behaviour
4.31 Wheel securing bolts: Tighten to speci‐
fied torque
♦ Pulling off wheel hub trim:
♦ Pulling off wheel trim
♦ Pulling off wheel bolt caps:
♦ Loosening/tightening anti-theft wheel bolts
♦ Tightening wheel bolts
♦ Installing wheel centre cover, wheel bolt cover caps and wheel
cover ⇒ page 78
Pulling off wheel hub trim
Caution
On vehicles with light alloy wheels do not lever wheel hub trim
off with screwdriver, only use the special tool for this purpose
(puller hook in vehicle tool kit).
The puller hook -1- to remove the cover caps is located with the
vehicle tool kit.
– Hook puller hook into one drilling of wheel hub trim and pull off
in -direction of arrow-.
76
4. Descriptions of work
⇒ page 76
⇒ page 77
⇒ page 77
⇒ page 77
⇒ page 78