Volkswagen Touareg 2010 Manual page 136

Touareg 2010 ➤
Maintenance - Edition 11.2011
It is automatically switched to test for readiness of operation.
It is checked here if all tests for readiness of operation supported
by the control unit have been performed.
Note
If all display values are set to zero, a regulating probe test is
♦
not performed.
If not all display values are set to zero, a regulating probe test
♦
will be performed later.
– Confirm condition of „MI lamp" -arrow B-.
Catalytic converter conditioning:
It is automatically switched to warm-up phase of catalytic con‐
verter.
– Follow instructions on display.
Measurement starts when the engine speed has reached the re‐
quired level.
– Maintain engine speed in required engine speed range.
The remaining time to perform the warm-up phase is displayed
-arrow A-.
Warm-up phase:
It is automatically switched to display for measuring engine tem‐
perature.
– Follow instructions on display.
Note
This is only indicated on display if engine temperature has not
reached 80 °C.
– Bring engine to required temperature.
132
5. Exhaust emissions test