Wheel Securing Bolts: Tightening To Specified Torque - Volkswagen Passat 2011 Maintenance Manual

Passat 2011 ➤ , Passat Variant 2011 ➤
Maintenance - Edition 01.2019
♦ Automatic gearbox: Selector lever position, shift lock/ignition
key removal lock, shift behaviour, dash panel insert display
♦ Foot brake and handbrake: function, free travel and effective‐
ness, pulling to one side, juddering, squeal
♦ ABS function: pulsing must be felt at the brake pedal during
ABS-regulated braking
♦ Steering: function, steering free clearance, steering wheel
centred when vehicle is travelling straight ahead
♦ Tilting roof: function
♦ Radio/radio navigation system: function, reception, GALA, in‐
terference noise
♦ Multi-function indicator (MFI): functions
♦ Air conditioning system: check function (At low temperatures
the function of air conditioner must be checked in a workshop).
♦ Vehicle: pulls to one side when travelling straight ahead (level
road).
♦ Imbalance: wheels, drive shafts, propshaft
♦ Noise/vibration: wheel bearing, exhaust system
♦ Engine: hot starting behaviour
4.41 Wheel securing bolts: tightening to
specified torque
♦ Pulling off wheel hub trim:
♦ Pulling off wheel trim
♦ Pulling off wheel bolt caps:
♦ Loosening/tightening anti-theft wheel bolts
♦ Tightening wheel bolts
♦ Installing wheel centre cover, wheel bolt cover caps and wheel
cover ⇒ page 122
Pulling off wheel hub trim
Caution
On vehicles with light alloy wheels do not lever wheel hub trim
off with screwdriver, only use the special tool for this purpose
(puller hook in vehicle tool kit).
The puller hook -1- to remove the cover caps is located with the
vehicle tool kit.
– Hook puller hook into one drilling of wheel hub trim and pull off
in -direction of arrow-.
120
4. Descriptions of work:
⇒ page 120
⇒ page 121
⇒ page 121
⇒ page 121
⇒ page 122