Brake Fluid Level (Depending On Lining/Pad Wear): Check - Volkswagen Touareg 2010 Manual

Touareg 2010 ➤
Maintenance - Edition 11.2011
Sequence: Disengagement clutch, wheel brake
cylinder, brake calipers
Disengagement clutch bleed connection (hybrid
vehicles)
Rear right
Rear left
Front right
Front left
Total quantity: approx. 1.0 litre, for hybrid models approx. 1.10 li‐
tre
– Fit caps on bleed valves of brake calipers.
Additionally for hybrid vehicles:
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 50 ; Noise insulation .
– Pull cover cap -1- from disengagement clutch bleed connec‐
tion.
– Push collector bottle bleeder hose onto bleed valve. Open
bleeder valve and let appropriate quantity of brake fluid run out
(see table).
– Close bleed valve and remove bleeder hose.
– Place cover cap onto bleed connection.
– Connecting diagnosis tester
– Performing functional check ⇒ Automatic gearbox 0C8 - 8-
speed; Rep. gr. 30 ; Repairing clutch mechanism .
– Install noise insulation ⇒ General body repairs, exterior; Rep.
gr. 50 ; Noise insulation .
Continuation for all vehicles:
– Move fill lever of -VAS 5234- or -V.A.G 1869- to position -B-
(see operating instructions).
– Remove filler hose from adapter.
– Unscrew adapter from brake fluid reservoir.
– Check brake fluid level and correct if necessary.
– Screw on cap -1- of brake fluid reservoir.
– Fold cover down again and push beneath seal.
– Remove brake pedal depressor.
– Check pressure and free travel of brake pedal. Free play: max.
1
/ 3 of pedal travel.
4.9 Brake fluid level (depending on lining/
pad wear): Check
Instructions for use and safety
34
4. Descriptions of work
Quantity of brake fluid which must flow out:
⇒ page 15 .
⇒ page 30
0.10 litre
0.25 litre
0.25 litre
0.25 litre
0.25 litre