Volkswagen Touareg 2010 Manual page 152

Touareg 2010 ➤
Maintenance - Edition 11.2011
– Follow instructions on display -arrow B-.
– Depress accelerator pedal fully when prompted and hold until
the prompt for idling is shown on display.
Free acceleration - phase 3:
– Remove foot from accelerator pedal when the prompt for idling
is shown on display -arrow B- and run engine at idling speed.
The test results and information on the latest „Free acceleration"
are shown on display -arrow A-. If the measured values are not
OK, here you can obtain information why the „Free acceleration"
has failed.
Note
If the field is coloured white the measured value is within tol‐
♦
erance.
If the field is coloured red the measured value is outside tol‐
♦
erance.
If the field is coloured yellow the measured value is outside
♦
tolerance, but can be assessed by the operator.
Further throttle bursts:
– Follow instructions on display -arrow B-.
Now the next throttle burst follows, starting with phase 1 of „Free
acceleration".
Many „Free accelerations" can be carried out until:
♦ Three „Free accelerations" have been completed in succes‐
sion and the range of acceleration is OK.
♦ All values are OK, with the exception of range of acceleration,
and the test is continued by pressing the
(In this case, the operator assesses if the value is OK.)
♦ The values are not OK and the measurement is terminated/
skipped by pressing the
If the measured values are OK after three throttle bursts in suc‐
cession, i.e. all fields are coloured white, the exhaust emissions
test is completed.
Evaluation:
When the exhaust emissions test has been performed, the log is
shown on display.
The test result is displayed.
Now remarks concerning the exhaust emissions test can be en‐
tered -arrow A-. They will then be included in the test log.
– When the exhaust emissions test is classed as passed, select
-arrow B- EET sticker issued in drop-down menu and date.
– Then confirm with „Yes" -arrow C-.
The exhaust emissions test log is shown on display and can be
printed out as often as required in the menu „Print preview" using
„Print" button -arrow A-.
148
5. Exhaust emissions test
button -arrow C-.
→
button -arrow C-.
→