Volkswagen Touareg 2010 Manual page 75

– When installing, make sure that rubber buffers are correctly
-at top in illustration- inserted into mountings.
4.26.2 Removing and installing engine cover
panel, 3.0 l V6 TDI
Removing:
Removing:
– First pull engine cover off at front with both hands (in direction
of travel) -arrows-, then lift at rear with both hands (in plenum
chamber bulkhead area).
Note
Do not lift engine cover abruptly when pulling off.
♦
Do not cant engine cover when pulling off!
♦
Installing:
Position engine cover on attaching points, observe oil filler neck.
Caution
♦ Do not push with the fist or a tool on the engine cover when
it is installed or engaged at securing points, it could be
damaged.
– Press engine cover on at front attaching points so that the
cover engages.
– Then press engine cover on at rear attaching points so that
the cover engages.
Touareg 2010 ➤
Maintenance - Edition 11.2011
4. Descriptions of work
71