Note
Coolant additive G12 Plus Plus protects the complete cooling
♦
system against corrosion and reduces the formation of sludge
and corrosion and also raises the boiling point of coolant. For
these reasons, the cooling system must be filled all-year-
round with a coolant and corrosion protection additives.
Because of its high boiling point, the coolant improves engine
♦
reliability under heavy loads, particularly in countries with trop‐
ical climates.
The coolant concentration must not be reduced by adding dis‐
♦
tilled water even in the warm season or in hot countries. The
antifreeze portion must be at least 40 %.
4.22
Air suspension: Checking for leaks and
damage
Procedure
– Check all 4 air suspension struts -arrow- for damage and
leaks.
Note
If damage or leaks are ascertained, these must be repaired. This
is a repair measure and must be discussed with the customer.
4.23
Air filter: Clean housing and renew filter
element
Note
Vehicles with 6-cylinder engines are fitted with one air filter.
♦
Vehicles with 8-cylinder engines have two air filters in the en‐
♦
gine compartment.
Removing and installing air filter element, 3.0 l V6 TSI / TSI hybrid
engine.
⇒ page 49
Removing and installing air filter element, 3.0 l V6 TDI engine.
⇒ page 52
Removing and installing air filter element, 3.6 l V6 FSI engine.
⇒ page 54
Removing and installing air filter element, 4.2 l V8 TDI.
⇒ page 56
Removing and installing air filter element, 4.2 l V8 FSI
⇒ page 58
4.23.1
Removing and installing air filter ele‐
ment, 3.0 l V6 TSI / TSI hybrid engine:
Remove engine cover.
⇒ page 70
Touareg 2010 ➤
Maintenance - Edition 11.2011
4. Descriptions of work
49