Car Finder - Directed SMARTSTART ASRA-2510 User Manual


To arm the OEM-style alarm, press the
transmitter.
o
o

To disarm the OEM-style alarm, press the
transmitter.
o

Car Finder

If configured by your installer, the Car Finder option will help you locate the
vehicle by sending a pulsating signal through the horn. To hear the signal, press
and hold the
for the time you keep the button pressed.
Intrusion Codes via horn
The system monitors the following:

Doors

Hood

Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1
minute.
If an intrusion has occurred and
intrusion code corresponding to the type of intrusion that occurred.
1x = power interruption
3x = Hood
User guide
The OEM-style alarm will ONLY arm if the
the transmitter is pressed.
The LED on the antenna will flash slowly to indicate that the
OEM-style alarm is now armed.
To stop the horn from sounding if the OEM-style alarm is
triggered, press the
system in and out of Valet mode (page 14).
or
or
button. This will produce a pulsating signal
pressed, the horn provides an
4x = Doors intrusion
6x = Ignition
button on the
button on
button on the
button, or put the
P.23