Home Valet Mode; Aux 1 - Directed SMARTSTART ASRA-2510 User Manual

Home Valet
If configured at installation, this feature will remotely set the vehicle to a no-
remote-start mode: if the vehicle is parked indoors there is no danger of it starting
accidentally by remote control. If the vehicle has a manual transmission, it should
be set into ready mode before activating the Home Valet™.
Note: Once the Home Valet Mode is activated, the vehicle will not start by
remote, but the OEM alarm functions will remain active.
To take the system into home valet mode:
8. Press the
9. Within 3 seconds, press the
simultaneously for 3 sec.
10. The P-lights will flash once
To take the system out of home valet mode:

Turn the ignition key to the IGNITION ON (RUN) position.

The system will warn you if someone attempts to start your vehicle while
it stands in home valet mode. The parking lights will:

ON
Turn

Flash twice, pause; then

Flash twice again.

AUX 1

Note: This 500 mA negative AUX 1 output can be used for many different
applications
Priority door:
This great feature allows the user to unlock solely the driver's door with a single
press of the
if desired, by pressing the
User guide
Mode
TM
or
OFF
then ; then
button on the transmitter, and to unlock the other doors,
button.
and
button for a second time.
buttons
P.21