Directed SMARTSTART ASRA-2510 User Manual page 15

To put the system into Valet mode using the TRANSMITTER (Remote Valet
mode):
1. Press the
parking lights flash three times.
2. The LED on the antenna will come ON solid to indicate that the vehicle
has successfully entered Valet mode.
To take the system out of Valet Mode
To take the system out of Valet mode using the KEY (Ignition Valet mode):
1. Insert the ignition key into the ignition switch. Within 10 sec., turn the
key 5 times successively into the IGNITION/RUN and OFF positions.
2. The parking lights will flash twice.
3. Turn the ignition OFF.
4. The LED on the antenna will flash quickly to indicate that the vehicle is
now out of Valet mode.
To take the system out of Valet mode using the TRANSMITTER (Remote Valet
mode):
1. Press the
parking lights flash twice.
2. The LED on the antenna will be OFF.
The system will warn you if someone attempts to remote start the vehicle while in
Valet Mode. The parking lights will turn ON then OFF, then Flash twice.
User guide
and buttons simultaneously until the
and buttons simultaneously until the
P.15