Multi-Car Operation; Oem-Style Alarm; Intrusion Codes Via Horn - Directed AstroStart RS-625 User Manual

Multi-car Operation

This option allows the owner of two vehicles, both equipped with the same Remote Car Starter
model, to control both systems with a single remote control.
To control the second vehicle:
Press TRUNK + LOCK buttons simultaneously: ----------------------------------------------------- LOCK
Press TRUNK + UNLOCK simultaneously: ----------------------------------------------------------- UNLOCK
Press TRUNK + START/STOP simultaneously: ----------------------------------------------------- START
Press TRUNK + START/STOP simultaneously: ----------------------------------------------------- STOP
Press AUX AUX TRUNK: -------------------------------------------------------------------------- TRUNK
OR
Press AUX AUX LOCK: ---------------------------------------------------------------------------- LOCK
Press AUX AUX UNLOCK: ------------------------------------------------------------------------ UNLOCK
Press AUX AUX START/STOP: ------------------------------------------------------------------ START
Press AUX AUX START/STOP: ------------------------------------------------------------------ STOP
Press AUX AUX TRUNK: -------------------------------------------------------------------------- TRUNK
Note: If the multi-level features have been modified from their default state by your installer, the
AUX button may have to be pressed once, twice or three times, according to the option you chose.

OEM-Style Alarm

The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned into the
IGNITION ON position.
To arm the OEM-style alarm, press the
-The OEM-style alarm will ONLY arm if the
The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed.
To disarm the OEM-style alarm, press the
-To stop the horn from sounding if the OEM-style alarm is triggered, press the
button, or put the system in and out of Valet Mode (See page 9).

Intrusion Codes via horn

The system monitors the following:
Doors
Hood
Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1 minute.
If an intrusion has occurred and pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
1x = power interruption
3x = Hood
User Guide
button on the transmitter.
button on the transmitter is pressed.
button on the transmitter.
4x = Doors intrusion
6x = Ignition
or
P.15