Analog Cordless 2-Line - A1420; Line - VTech Analog Classic Series User Manual

Place a call on hold on the cordless
handset
1. During a call, press HOLD on the cordless
handset.
• The TALK key on the cordless handset and
the HOLD key on the telephone base flash
when the call is on hold.
2. Press TALK or
call from hold, or the call will end automatically
after the preset call on hold duration.
Place a call on hold on the telephone
base
1. During a call, press HOLD on the
telephone base. The TALK key on the cordless
handset and the HOLD key on the telephone
base flash when the call is on hold.
2. Press / SPEAKER to release the call from
hold, or the call will end automatically after the
preset call on hold duration.
Find handset
Use this feature to find all registered
cordless handsets.
Start paging
Press /FIND HANDSET on the telephone
base when the telephone is not in use. All idle
cordless handsets beep for 60 seconds.
End paging
• Press /FIND HANDSET again on the
telephone base; or
• Press any key on the cordless handset to
stop the paging tone.
Data port
You can connect your modem or fax
machine to the telephone line through the
DATA port.
/ SPEAKER to release the

Analog Cordless 2-line - A1420

Using the cordless handset and the
telephone base
The cordless handset and the telephone
base cannot be used on the same call.
However, calls can be switched between the
cordless handset and the telephone base
speakerphone.
When the cordless handset or the telephone
base is in use, the corresponding line keys on
the cordless handset and the telephone base
illuminate.
Receive a call
The telephone rings when there is an incoming
call. The respective line key and the MESSAGE
WAITING LED flash.
Answer a call using the cordless handset
while it is not on the telephone base or
charging base
On the cordless handset, press the flashing line
key or / SPEAKER to pick up the ringing line.
• The respective line key illuminates when in
use. The / SPEAKER key illuminates when
in speakerphone mode.
Answer a call using the cordless handset
while it is cradled on the telephone base
or charging base
Lift the cordless handset from the telephone
base. It automatically connects to the ringing

line.

• The respective line key illuminates when in
use.
EN - 45