Telephone Settings; Analog Corded Lobby/ 1-Line/ 2-Line - A1100/A1210-A/Cl-A1110/A1220 - VTech Analog Classic Series User Manual
Analog corded lobby hotel phone,analog corded 1-line hotel phone, corded analog corded 2-line hotel phone ,analog corded trimstyle hotel phone,analog cordless 1-line hotel phone, analog cordless 2-line hotel phone, analog cordless charging base, analog co
Table of Contents
Advertisement
Telephone settings
Analog Corded Lobby/ 1-line/ 2-line -
A1100/A1210-A/CL-A1110/A1220
Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
(for models A1210-A, CL-
A1110 and A1220 only)
Speakerphone volume
(for model A1210-A and
A1220 only only)
Ringer volume
(for models A1210-A, CL-
A1110 and A1220 only)
Ringer tone
Flash
(for model A1210-A and
A1220 only only)
Voicemail voltage detection
(for models A1210-A, CL-
A1110 and A1220 only)
Ringer tone
There are 3 ringer tone options. For 2-line
model A1220, changing the ringer tone of
either LINE 1 or LINE 2 applies to both phone
lines.
To change the ringer tone
1. Turn the telephone base over with the
bottom side facing up. Remove the mounting
bracket if it is in desktop position. Press the
tabs of the mounting bracket as the direction
indicated below to release and remove the
mounting bracket from the telephone base.
Options
1, 2*, 3, 4
1, 2, 3, 4, 5*, 6, 7, 8
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
1 (100ms), 2 (300ms), 3* (600ms)
Disable voicemail voltage detection,
Periodic low voltage pulse detection
method, Steady high voltage and
periodic high voltage pulse detection
method
EN - 30
Adjustable by
User and administrator
User and administrator
User and administrator
Adminstrator only
Adminstrator only
Adminstrator only
Mounting
bracket
Advertisement
Chapters
Table of Contents
