Line 1 - VTech Analog Classic Series User Manual

Speakerphone
When the telephone is idle, press
on the cordless handset or the
SPEAKER
telephone base. The first available line is
selected, starting with line 1.
Redial
The last dialed number on the cordless
handset or the telephone base is stored for
15 minutes.
Redial the last dialed number from the
handset or the telephone base
or
Press LINE 1, LINE 2
for a dial tone. Then, press REDIAL.
Volume
Listening volume can be adjusted on the
cordless handset and the telephone base.
Adjust the listening volume
• During a call on the handset, press +/
VOLUME/- on it to adjust the listening
volume. The next call returns to the default
listening volume.
• During a call on the telephone base, press
+/- VOLUME on it to adjust the listening
volume. The next call returns to the default
listening volume.
Adjust the ringer volume of the telephone
base
Ringer volume of the telephone base can be
adjusted. When the telephone base is idle,
press +/- VOLUME on it to adjust the ringer
volume.
/
. Listen
/ SPEAKER
EN - 47
Call waiting
1. When you hear a call waiting tone during
a call, press FLASH on the cordless handset or
the telephone base to put the current call on
hold and take the new incoming call.
2. Press FLASH at any time to switch back and
forth between calls.
Mute
Mute the microphone
1. During a call, press MUTE on the
cordless handset or the telephone base
MUTE
• The key illuminates when the mute
function is turned on. You can hear the party
on the other end but they cannot hear you.
MUTE
2. Press again to resume the
conversation.
MUTE
• The light on the
Hold
When a call is placed on hold, any parallel
phone that tries to use the same phone line will
take the call off hold and pick the call.
Place a call on hold
1. During a call, press HOLD on the cordless
handset or telephone base.
• The respective line key flashes when the call
is placed on hold.
2. Press the flashing line key or
to release the call from hold, or the call will
end automatically after the preset call on hold
duration.
• When both lines are on hold, press
SPEAKER only to release the call on hold on

line 1.

.
key turns off.
/ SPEAKER
/