Appendix; Handset Battery - VTech Analog Classic Series User Manual

Appendix

Handset battery

It takes up to 16 hours for the battery to be
fully charged. When it is fully charged, you can
expect the following performance:
Operation
While in handset use
(talking*)
While in
speakerphone mode
(talking*)
While not in use
(standby**)
* Operating times vary depending on your
actual use and the age of the battery.
** Handset is not charging or in use.
The battery needs charging when:
• A new battery is installed in the handset.
• LOW BATTERY LED illuminates on the
cordless handset.
CAUTIONS
To reduce the risk of fire or injury, read and
follow these instructions:
• Use only the supplied rechargeable battery
(BT264392/BT266342) or replacement battery
(BT266342). To order a replacement, contact
your local distributor.
• Do not dispose of the battery in a fire. Check
with local waste management codes for
special disposal instructions.
• Do not open or mutilate the battery.
Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
• Exercise care in handling the battery in order
not to create a short circuit with conductive
materials.
• Charge the battery provided with or
identified for use with this product only
in accordance with the instructions and
Operating time
Up to 7 hours
Up to 5 hours
Up to 7 days
EN - 49
limitations specified in this user guide.
• Observe proper polarity orientation
between the battery and metallic contacts.
• To prevent fire or shock hazard, do not
expose this product to water or any type of
moisture.