Analog Cordless 1-Line/2-Line - A1410/A1420 - VTech A1100 Analog Classic Series User Manual
Analog corded lobby hotel telephone - a1100, analog corded 1-line hotel telephone - a1210/cl-a1110, analog corded 2-line hotel telephone - a1220, analog corded trimstyle hotel telephone - a1310/a1311, analog cordless 1-line hotel telephone - a1410, a
Hide thumbs
Also See for A1100 Analog Classic Series:
- Master user manual (42 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
Installation
Analog cordless 1-line/2-line - A1410/A1420
Telephone base installation
The telephone comes ready for desktop use. Install the telephone base as shown below.
RJ-45
cord
Power cord jack
1.
When the telephone base has been initially installed, make sure the power adapter is securely plugged into an outlet not
controlled by a wall switch, and the telephone line cord is plugged firmly into the power adapter and the telephone wall jack.
2.
Press
/SPEAKER on the telephone base. Listen for a dial tone and then press
CAUTION:
Use only the supplied RJ-45 cord and power adapter. RJ-45 cord is not designed for use in any other IT devices. Misuse of RJ-45 cord on your
other IT devices shall be prohibited. To order a replacement, call 1-888-907-2007.
Telephone
line cord
RJ-45 cord
Electrical outlet not
controlled by a wall switch
Power
adapter
Telephone
line cord
/SPEAKER again to hang up.
20
Telephone wall jack
If you have High Speed
Internet Access service,
a DSL filter (not included)
is required.
Hide quick links:
Advertisement
Table of Contents
