Analog Corded Trimstyle - A1310/A1311 - VTech Analog Classic Series User Manual

End a conference call
• Press the line key that you want to maintain
connection and the other line will be
dropped.
• When the conference call is in
speakerphone mode, press CONF or
SPEAKER on the telephone base to end.
• When the conference call is in handset
earpiece mode, place the corded handset
back in the telephone base to end.
• When there is more than one telephone on
the conference call, the call ends when all
telephones hang up.
Data port
You can connect your modem or fax
machine to the telephone line through the
DATA port. The data port routes to line 2.

Analog Corded trimstyle - A1310/A1311

Receive a call
The telephone rings and the MESSAGE
/
WAITING LED flashes when there is an
incoming call.
Answer a call
Lift the corded handset from the telephone
base.
Place a call
Lift the corded handset from the telephone
base. Listen for a dial tone and then dial the
desired number.
End a call
Place the corded handset in the telephone
base.
Share a call
During a call, parallel telephones (telephones
on the same line) can join the call. If the parallel
telephone is a 2-line model, this telephone can
only share a call on any one line.
Join a call
During a call, lift the corded handset to join.
Volume
Listening volume can be adjusted from the
corded handset.
Adjust the listening volume
During a call, press
side of the handset to adjust the listening
volume. The next call returns to the default
listening volume.
EN - 42
+/VOLUME/- on the