Speed Dial Keys - VTech Analog Classic Series User Manual

Speed Dial keys

For models A1210-A and A1220, there are up
to 10 programmable guest-service (Speed
Dial) keys. Program these keys to automatically
dial telephone numbers or to activate
telephone system features.
To program a Speed Dial key
1. Remove the faceplate and overlay if they
are on the telephone base. Press
on the telephone base or lift the handset.
Then, press the recessed PROGRAM key. The
MUTE key flashes when in administrator mode.
2. Press the desired Speed Dial key where
the telephone number is to be stored. You
hear 3 beeps.
3. Enter the telephone number (up to 16
digits in length).
• To insert a pause in the stored number, press
the recessed PAUSE key.
4. The telephone stores the number
automatically when 16 digits are entered.
When the number has less than 16 digits, press
the recessed PROGRAM key again. You hear 3
rising beeps as confirmation.
To clear the programmed Speed Dial key
1. Remove the faceplate and overlay if they
are on the telephone base. Press
on the telephone base or lift the handset.
Then, press the recessed PROGRAM key. The
MUTE key flashes when in administrator mode.
2. Press the Speed Dial key where the
telephone number is to be deleted. You hear
3 beeps. Press the recessed PROGRAM key
again. You hear 3 rising beeps as confirmation.
For CL-A1110, there are 11 programmable
guest-service (Speed Dial) keys. Program these
keys to automatically dial telephone numbers
or to activate telephone system features. When
you program a Speed Dial key which is already
prorgammed, the new number will override
the old one.
To program a Speed Dial key
1. Remove the faceplate and overlay if they
are on the telephone base. Lift the handset,
/ SPEAKER
then press the recessed PROGRAM key.
2. Press the desired Speed Dial key where
the telephone number is to be stored. You
hear a beep.
3. Enter the telephone number (up to 21
digits in length).
• To insert a pause in the stored number, press
the recessed PAUSE key.
4. Press the recessed PROGRAM key again to
save. You hear a beep as confirmation.
/ SPEAKER
EN - 32