Analog Corded 2-Line - A1220 - VTech Analog Classic Series User Manual

Analog Corded 2-line - A1220

Using the corded handset and the
telephone base
The corded handset and the telephone base
speakerphone cannot be used at the same
time. However, calls can be switched between
the corded handset and the telephone base
speakerphone.
Receive a call
The telephone rings when there is an incoming
call. The MESSAGE WAITING LED and the
respective line key flash.
Answer a call using the corded handset
Lift the cordless handset and it connects to the
ringing line.
• The respective line key illuminates when in
use.
Answer a call using the telephone base
Press the flashing line key, or press
SPEAKER to pick up the ringing line.
• The respective line key and the
SPEAKER key illuminate when in use.
Place a call
Lift the corded handset, or press LINE 1, LINE2,
or / SPEAKER on the telephone base.
Listen for a dial tone and then dial the desired
number, or press a Speed Dial key to dial a
programmed number.
• The respective line key illuminates when in
use. The / SPEAKER key illuminates when
in speakerphone mode.
End a call
Place the corded handset in the telephone
base, or press
key when in speakerphone mode.
Switch a call between the corded
handset and the telephone base
speakerphone
• To switch a call from the corded handset
to the telephone base speakerphone,
press
and then place the corded handset on the
telephone base cradle. The active line is
selected. When both lines are in use or on
hold, LINE 1 is selected.
• To switch a call from the telephone base
speakerphone to the corded handset
currently on the telephone base cradle, lift
the corded handset from the telephone
base cradle. The active line is selected.
When both lines are in use or on hold, LINE
1 is selected.
• To switch a call from the telephone base
speakerphone to the corded handset, which
/
is not on the telephone base cradle, press
/ SPEAKER on the telephone base. The
/
active line is selected. When both lines are in
use or on hold, LINE 1 is selected.
Share a call
During a call, parallel telephones
(telephones on the same line) can join the
call.
Join a call
During a call on line 1 or line 2, press the
respectibe line key to join
EN - 40
/ SPEAKER or the active line
/ SPEAKER on the telephone base,
.