Analog Corded 1-line - CL-A1110
Receive a call
The telephone rings and the MESSAGE
WAITING LED flashes when there is an
incoming call.
Answer a call
Lift the corded handset from the telephone
base.
Place a call
Lift the corded handset. Listen for a dial tone
and then dial the desired number, or press a
Speed Dial key to dial a programmed number.
End a call
Place the corded handset in the telephone
base.
Share a call
During a call, parallel telephones (telephones
on the same line) can join the call.
Join a call
During a call, lift the corded handset to join.
Volume
Listening volume and ringer volume can be
adjusted from the telephone base.
Adjust the listening volume
+/-VOLUME to adjust the
During a call, press
listening volume. The next call returns to the
default listening volume.
Adjust the ringer volume
At any time, slide the RINGER VOL switch
on the right side of the telephone base to
adjust the ringer volume
.
EN - 39
Call waiting
1. When you hear a call waiting tone during
a call, press switch hook rapidly to put your
current call on hold and take the new incoming
call.
2. Press the switch hook rapidly at any time to
switch back and forth between calls.
Data port
You can connect your modem or fax
machine to the telephone line through the
DATA port.