Analog Cordless Charging Base - C3000 - VTech Analog Classic Series User Manual

5. Mount the telephone base on the wall by
positioning the eyelets on the telephone base
and mounting bracket against the mounting
studs of the wall plate. Then slide the telephone
base down on both mounting studs until it locks
into place.
6. Connect the power cord to the telephone
base. Plug the power adapter into an electrical
outlet not controlled by a wall switch, and plug
the telephone line cord into the telephone wall
jack. Then replace the cordless handset on the
telephone base cradle.

Analog Cordless Charging base - C3000

Charging base installation
The charging base can be adapted to desktop
use or mount on a standard telephone wall
plate.
Installation option - desktop position
1. Turn the charging base over with the
bottom side facing up. Connect the power
cord to the charging base.
Power cord
2. Position the mounting bracket as shown.
Insert the tabs into the upper grooves and
tighten the screw to affix the mounting
bracket.
3. Plug the power adapter into an electrical
EN - 25