VTech Analog Classic Series User Manual page 55

Question
The telephone does not ring when there is an
incoming call.
Suggestion
• Make sure the telephone line cord and the
power adapter are plugged in properly
(page 21).
• The cordless handset may be too far from
the telephone base. Move it closer to the
telephone base.
• Adjust the setting of RF transmission power
(page 35). It may be out of range.
• If other telephones in your hotel are having
the same problem, the problem is in the
wiring or telephone service. Contact your
telephone service provider (charges may
apply).
• Other electronic products such as HAM
radios and other DECT phones can cause
interference with the cordless phone. Try
installing the phone as far away as possible
from these types of electronic devices.
• Test a working telephone at the telephone
wall jack. If the other telephone has the same
problem, the problem is in the telephone
wall jack. Contact your telephone service
provider (charges may apply).
• The telephone line cord may be defective.
Install a new telephone line cord.
• Remove the battery and then install it again.
Then place the cordless handset in the
telephone base. Wait for the handset to
synchronize with the telephone base. Allow
up to one minute for this to take place.
EN - 55