Installation; Analog Corded 1-Line/2-Line Petite Phone - A2211/A2221; Analog Corded 2-Line Trimstyle Phone - A2321 - VTech A2211 User Manual

Installation

Analog Corded 1-line/2-line Petite Phone - A2211/A2221

Analog Corded 2-line Trimstyle Phone - A2321

Telephone base installation
The telephone can be adapted to desktop use or mounted on a standard telephone wall plate.
Installation option - desktop position
1. Turn the telephone base over with the bottom side facing up. Connect the telephone line cord to the telephone base and route
along the wire duct.
Telephone line jack
2. Position the mounting bracket as shown. Insert the two small tabs of the mounting bracket into the lower slots on the telephone
base. Then press the large tab on the mounting bracket and firmly push it into the upper groove on the telephone base.
3. Install the telephone base as shown below. Then connect the coiled handset cord to the telephone base.
Wire duct
5