VTech Analog Classic Series User Manual page 51

Question
The telephone does not ring when there is an
incoming call.
There is interference during a telephone
conversation.
Suggestion
• Make sure the telephone line cord is
plugged in properly (page 16, 18, and
20).
• If other telephones in your hotel are having
the same problem, the problem is in the
wiring or telephone service. Contact your
telephone service provider (charges may
apply).
• Test a working telephone at the telephone
wall jack. If another telephone has the same
problem, the problem is in the telephone
wall jack. Contact your telephone service
provider (charges may apply).
• The telephone line cord may be defective.
Install a new telephone line cord.
• If there is High Speed Internet Access
(HSIA) available at the premises through a
telephone line, you may need to install a DSL
filter (DSL - digital subscriber line) between
the telephone line cord and the telephone
wall jack. The filter prevents noise and caller
ID problems caused by DSL interference.
Contact your DSL service provider for more
information about DSL filters.
• If your telephone is plugged in with a
modem or a surge protector, plug the
telephone (or modem/surge protector)
into a different location. If this doesn't solve
the problem, relocate your telephone or
modem farther apart from each other, or use
a different surge protector.
• Disconnect the telephone base from the
telephone wall jack. Plug in a different
telephone. If calls are still not clear, the
problem is probably in the wiring or
telephone service. Contact your telephone
service provider (charges may apply).
• If other telephones in your hotel are having
the same problem, the problem is in the
wiring or telephone service. Contact your
telephone service provider (charges may
apply).
EN - 51