Speed Dial Keys - VTech A2210-NS User Manual

Voicemail voltage detection
There are  options to set the voicemail voltage detection on the telephone base.
To disable the voicemail voltage detection:
. Remove the faceplate and overlay if they are on the telephone base. Then remove the sticker on the telephone base.
2. Use a narrow object to unplug all the jumpers from the telephone base.
. Place the sticker back in place.
To set the voicemail voltage detection by the periodic low voltage pulse detection method:
. Remove the faceplate and overlay if they are on the telephone base. Then remove the sticker on
the telephone base.
2. Use a narrow object to unplug all the jumpers from the telephone base. Then plug the jumpers into
, and .
1 2 3
. Place the sticker back in place.
To set the voicemail voltage detection by the steady high voltage and periodic high voltage
pulse detection method:
. Remove the faceplate and overlay if they are on the telephone base. Then remove the sticker on
the telephone base.
2. Use a narrow object to unplug all the jumpers from the telephone base. Then plug the jumpers into
, and .
1 2 4
. Place the sticker back in place.

Speed Dial keys

There are up to 0 programmable guest-service (Speed Dial) keys. Program these keys to automatically dial telephone numbers or
to activate telephone system features.
To program a Speed Dial key:
. Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
The MUTE key flashes when in administrator mode.
2. Press the desired Speed Dial key where the telephone number is to be stored. You hear  beeps.
. Enter the telephone number (up to 6 digits).
To insert a pause in the stored number, press the recessed PAUSE key.
•
. The telephone stores the number automatically when 6 digits are entered. When the number has less than 6 digits, press the
recessed PROGRAM key again. You hear 3 rising beeps as confirmation.
To clear the programmed Speed Dial key:
. Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
The MUTE key flashes when in administrator mode.
2. Press the Speed Dial key where the telephone number is to be deleted. You hear  beeps. Press the recessed
again. You hear 3 rising beeps as confirmation.

Jumper
1 2 3 4
PROGRAM key