Operation
Receive a call
When there is an incoming call, the telephone
rings and the MESSAGE WAITING LED flashes.
To answer a call:
Lift the corded handset from the telephone base
to answer or press
Place a call
Lift the corded handset from the telephone base
or press
. Listen for a dial tone and then
dial the desired number, or press a Speed Dial
key to dial a programmed number. The
illuminates when in speakerphone mode.
End a call
Place the corded handset in the telephone base,
or press
when in speakerphone mode.
Speed dial
To dial a speed dial number, press a speed dial key.
(CONCIERGE, FRONT DESK or ROOM SERVICE).
Volume
Listening volume can be adjusted from the
telephone base.whereas ringer volume cannot
be adjusted.
To adjust the listening volume:
During a call, press VOL +/- to adjust the listening
volume. The next call returns to the default
listening volume.
.
Mute
To mute the microphone:
1. During a call, press
illuminates when the mute function is turned
on. You can hear the party on the other end
but they cannot hear you.
2. Press
again to resume the conversation.
The light on the
Speakerphone
1. During a call, press
between the corded handset earpiece
mode and the speakerphone mode.
key
Press
corded handset earpiece.
The
key illuminates when in use.
2. In idle mode, press
the speakerphone mode and
illuminates when in speakerphone mode.
Message waiting indicator
When a new voice message is received, the
Message Waiting LED
Play messages
Press
in idle mode to play messages.
EN - 16
. The
key turns off.
to switch a call
again to switch back to the
to activate
flahes.
key
key