Table of Contents
Advertisement
7
Removing / Inserting the Hard Drive
To remove the hard drive from the NVR
1.
Ensure the NVR is powered OFF.
2. Insert the key into the hard drive lock and turn it counterclockwise.
3. Turn the two hard drive thumb screws counterclockwise until they are loose.
4. Pull the hard drive firmly and straight out.
To reinsert the hard drive into the NVR
1.
Push the hard drive firmly all the way into the NVR.
2. Turn the two hard drive thumb screws clockwise until they are secure.
Do not over-tighten the thumb screws. Use finger pressure only!
3. Insert the key into the hard drive lock and turn it clockwise.
ROADRECORDER® 9000 USER GUIDE
Advertisement
Table of Contents
