Launch The Sv Windows Application - Safety Vision ROADRECORDER 9000 User Manual

Windows os

Hide thumbs Also See for ROADRECORDER 9000:

Table of Contents

Launch the SV Windows Application

To access the NVR's configuration menus, connect to the NVR and launch the SV Windows Application.

There are two methods for connecting to the NVR and launching the SV Windows Application:

Using a keyboard, mouse and monitor – (preferred method)

•

Monitor – HDMI

•

Keyboard and mouse – USB

If using this method, connect keyboard, mouse, and monitor to NVR, then launch the SV Windows application (by clicking on

the SV Windows Application icon located in the window's tray) for NVR configuration menus.

2. Using your PC and Windows Remote Desktop Connection Application – (Ethernet cable required)

If using this method, connect the PC to the NVR's Ethernet LAN 1 RJ45 port with a standard Ethernet cable. (Ensure the NVR

and PC are receiving power and have started up.) Launch the Windows Remote Desktop Connection application and enter the

following IP address: 192.168.0.100.

Once you are connected to the

NVR, launch the SV Windows

application (by clicking on the SV

Windows Application icon located

in the window's tray) for NVR

configuration menus.

ROADRECORDER® 9000 USER GUIDE

Table of Contents

9000-nvr