Table of Contents
Advertisement
PART 1: HARDWARE
Components
Front Panel
1
System Status LEDs:
HDD
•
◦ BLINKS – When there is Reading and Writing Activity.
◦ SOLID – When there is HDD fault active.
•
ACC
◦ SOLID – Powers on when the ignition is turned on.
•
UPS
◦ SOLID – Powers on when the main power is lost, and
the NVR is powered by internal backup power supply.
•
WWAN
◦ SOLID – Will remain off by default. Only turns on
when a cellular modem is installed within the NVR.
2
LAN 2:
•
8-pin A-Code M12 Gigabit Network Interface Controller
(NIC).
•
Interface with external WIFI / Cellular Routing Device.
ROADRECORDER® 9000 USER GUIDE
3
4
5
6
PoE 1 – PoE 8:
•
8-pin A-Code M12 Gigabit Power over Ethernet (PoE) NIC.
•
Type 2 Class 4 PoE (25.5-Watt 53VDC).
GPS Antenna Input:
•
Connection for external GPS antenna.
Hard Drive Canister:
•
2 x 2.5" SATA SSD with tamper proof drive case locks.
Requires key to remove drive canister.
WIFI 1 / WIFI 2 Antenna Inputs – 2.4 GHz / 5.0 GHz:
•
802.11ac, up to 867 Mbps speeds 5.0 GHz | 144 Mbps
2.4 GHz.
2
Advertisement
Table of Contents
