Table of Contents
Advertisement
19
GPS
The GPS page configures the GPS signal priority and shows the current GPS information.
GPS Type
Use the dropdown menus in the Priority fields to select which
device has priority in providing NVR with GPS data.
•
Priority: Select either 1, 2, (or N/A if the device is
unavailable) from the dropdown menu to set the GPS
priority for Internal GPS and Garmin.
•
Device Name: If using a Garmin GPS device, select either
COM1 if connected to COM1 or COM2 if connected to
COM2.
Click Apply to save changed entries.
GPS Status
On page load, it shows the current GPS information for the
GPS device with the highest priority in settings above. These
fields are for display only and cannot be changed.
ROADRECORDER® 9000 USER GUIDE
NOTE: Page will refresh every 1 sec.
•
GPRMC: Recommended minimum specific GPS/Transit
data.
•
Valid: Shows validity of data.
•
Latitude: Shows current Latitude.
•
Longitude: Shows current Longitude.
•
Altitude: Shows current Altitude.
•
Speed: Shows current speed in mph.
•
Heading: Shows current heading position.
•
Satellite: Shows number of satellites.
Advertisement
Table of Contents
