Table of Contents
Advertisement
15
Input/Outputs
The Sensor Input Output Settings page configures the NVR's sensor inputs and relay outputs.
•
Digital Input: Sensor input number.
•
Sensor Name: Enter a name for each sensor input in this
field.
•
Sensor Action: Select the action that occurs for each
sensor input when triggered. For now, Metadata is the
only action supported for all. If using an external UPS,
select Backup Power for sensor input 8 (only sensor input 8
supports Backup Power).
◦ Timeout(Min): Select the amount of time (1 to 15
minutes) from the dropdown menu to set timer for
Backup Power. When timer expires, NVR will shut
down. If trigger becomes active in between, timer will
be aborted.
ROADRECORDER® 9000 USER GUIDE
Click Apply to save changed entries.
•
Digital Out: Relay output number.
•
Status: Current state of each relay output. Users can
control state of each relay output by selecting ON or OFF
from the dropdown menu.
Advertisement
Table of Contents
