Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
Series X - Standard Display (STD) Models
HD 08T21 STD-xxx-Fxxx - 8.0 inch Standard Display
HD 13T21 STD-xxx-Fxxx - 13.3 inch Standard Display
User Manual STD Series X Compact
Updated: 07 Mar 2012
Doc Id: INB100535-2 (Rev 1)
Created: 363
Approved: 4701
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
Advertisement
Table of Contents
Related Manuals for Hatteland HD 08T21 STD-xxx-Fxxx
Summary of Contents for Hatteland HD 08T21 STD-xxx-Fxxx
- Page 1 U S E R M A N U A L Series X - Standard Display (STD) Models HD 08T21 STD-xxx-Fxxx - 8.0 inch Standard Display HD 13T21 STD-xxx-Fxxx - 13.3 inch Standard Display User Manual STD Series X Compact Updated: 07 Mar 2012...
- Page 2 Information in this manual is copyrighted to the respective owners. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Terminal Label Markings of 13 inch unit ........17 Connection area of 13 inch unit ...........17 Operation ..................19 User Controls ...................20 Specifications ................21 Specifications - HD 08T21 STD-xxx-Fxxx ..........22 Specifications - HD 13T21 STD-xxx-Fxxx ..........23 INB100535-2 (Rev 1) IND100130-45... - Page 4 Contents Technical Drawings ..............25 Technical Drawings - HD 08T21 STD-xxx-Fxxx ........26 Technical Drawings - HD 13T21 STD-xxx-Fxxx ........27 Appendixes ................... 29 Pinout Assignments .................30 Basic Trouble-shooting ................31 Declaration of Conformity ................32 Return Of Goods Information ..............33 Terms .......................34 Pixel Defect Policy ...................36 Notes ......................37...
-
Page 5: Contents Of Package
Contents of package Item Description Illustration 1 pcs of Standard DVI Signal Cable. DVI-D 18+1P Male to DVI-D 18+1P Male Single Link - Length 2.0m HA-SDM-2M 1 pcs of DVI > RGB/VGA adapter DVI 12+5P Male to DSUB 15P Female DVI-4 Documentation and Driver DVD/CD containing the user manual, including the Touch Screen driver for units delivered with a factory mounted touch screen. - Page 6 This page left intentionally blank INB100535-2 (Rev 1)
-
Page 7: General
General INB100535-2 (Rev 1) -
Page 8: About This Manual
About Hatteland Display Hatteland Display is the leading technology provider of specialized display and computer products, delivering high quality, unique and customized solutions to the international maritime, naval and industrial markets. -
Page 9: Standard Display (Std) - Introduction
Compact Displays Series X Standard Display (STD) - Introduction Series X Displays offer the ultimate in performance, convenience, state of the art design and enduring quality for system integrators and boat builders. Series X products offer a range of feature sets optimized for varying requirements and applications. -
Page 10: Product Labeling
Series X Displays - Typenumber Overview Manufacturer & Country IND100780-3 - Rev 06 - 02 Mar 2012 This document explains the type number structure for the Hatteland Display Series X Maritime Multi Display product range. - Example standard typenumber: HD 19T21 MMD-MA1-FAGA Manufactured Date yyyymmdd - Example standard description: Input Voltages &... -
Page 11: Installation
Installation INB100535-2 (Rev 1) -
Page 12: First Things First
General Installation Recommendations First Things First! ATTENTION! To prevent damage to chassis corners and / or breaking front glass, please review the illustrations below before handling the units! IND100148-5 - Rev 01 WRONG CORRECT HANDLING ! HANDLING ! TABLE OR FLAT CLEAN SURFACE NO TABLE OR UNEVEN / DIRTY SURFACE TABLE OR FLAT CLEAN SURFACE NO TABLE OR UNEVEN / DIRTY SURFACE... -
Page 13: General Mounting Instructions
9. The classification is only valid for approved mounting brackets provided by Hatteland Display. The unit shall be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of mounting might require test and re-classification. -
Page 14: Ergonomics
General Installation Recommendations Ergonomics 1. Adjust the unit height so that the top of the screen is at or below eye level. Your eyes should look slightly downwards when viewing the middle of the screen. 2. Adjust screen inclination to remain gaze angle to the centre of the screen approximately perpendicular to the line of gaze. -
Page 15: Configuring Housing Connectors
General Installation Recommendations Configuring housing connectors Housing connectors are available in different sizes (2-pin, 4-pin, 5-pin) which plugs into the connector area of the unit. These housing connectors are by factory default mounted on the unit. Below is a brief illustration that might be useful during configuration and installation of such connectors. -
Page 16: Physical Connections
Physical Connections Terminal Label Markings of 8 inch unit Connection area of 8 inch unit DVI-I In Grounding Screw USB Touch 2 x DC Power Inputs INB100535-2 (Rev 1) IND100133-50... -
Page 17: Terminal Label Markings Of 13 Inch Unit
Physical Connections Terminal Label Markings of 13 inch unit Connection area of 13 inch unit DVI-I In Grounding Screw USB Touch 2 x DC Power Inputs INB100535-2 (Rev 1) IND100133-50... -
Page 18: Power Inputs
Physical Connections Note: For details about the connectors below, please review the “Pinout Assignments” section in this manual. USB TOUCH: Connect a TYPE B USB Cable between this connector and your PC. Suitable drivers to install and calibrate the touchscreen are available on the separate installation media delivered with the unit. USB1.1 is suitable for cable distances above 10meter/32.8 feet, whereas USB2.0 is suitable from less than 10meter/32.8 feet distances. -
Page 19: Operation
Operation INB100535-2 (Rev 1) -
Page 20: User Controls
Used to sense level of ambient light in the surrounding environment. The sensor data can be read by suitable software through the Hatteland Display SCOM functionality of the unit and thus can be used to control brightness remotely. Note: This sensor is not visible for the eye or has any illumination behind to indicate it’s position. Further, by touching or covering this area will naturally make the sensor data inaccurate. -
Page 21: Specifications
Specifications INB100535-2 (Rev 1) -
Page 22: Specifications - Hd 08T21 Std-Xxx-Fxxx
Specifications - HD 08T21 STD-xxx-Fxxx PRODUCT SPECIFICATIONS - HD 08T21 STD-xxx-Fxxx Note: All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: • 8.0 inch TFT Liquid Crystal Display module • 236.00 (W) x 166.00 (H) x 51.00 (D) mm •... -
Page 23: Specifications - Hd 13T21 Std-Xxx-Fxxx
Specifications - HD 13T21 STD-xxx-Fxxx PRODUCT SPECIFICATIONS - HD 13T21 STD-xxx-Fxxx Note: All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: • 13.3 inch TFT Liquid Crystal Display module • 355.00 (W) x 248.50 (H) x 58.00 (D) mm •... - Page 24 This page left intentionally blank INB100535-2 (Rev 1)
-
Page 25: Technical Drawings
Technical Drawings INB100535-2 (Rev 1) -
Page 26: Technical Drawings - Hd 08T21 Std-Xxx-Fxxx
Technical Drawings - HD 08T21 STD-xxx-Fxxx Standard Version INB100535-2 (Rev 1) IND100132-235... -
Page 27: Technical Drawings - Hd 13T21 Std-Xxx-Fxxx
Technical Drawings - HD 13T21 STD-xxx-Fxxx Standard Version INB100535-2 (Rev 1) IND100132-236... - Page 28 This page left intentionally blank INB100535-2 (Rev 1)
-
Page 29: Appendixes
Appendixes INB100535-2 (Rev 1) -
Page 30: Pinout Assignments
Pinout Assignments All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. 18/24/24+5 pin DVI-D, DVI-I, Single Link, Dual Link Combined 4 pin USB TYPE B 1 2 3 4 5 6 7 8 C1 C2 Pin 1: VCC +5V Pin 2: Negative Data... -
Page 31: Basic Trouble-Shooting
Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only meant as a general guide. O PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness is set/adjusted to max brightness. -
Page 32: Declaration Of Conformity
Declaration of Conformity We, manufacturer, Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC and HD MMC product ranges is in conformity with the following standards in accordance with the EMC Directive. -
Page 33: Return Of Goods Information
Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned. -
Page 34: Terms
Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Hatteland Display AS charge NOK 50,- in forwarding fee for orders below NOK 1000,-. Freight charge according to expenses for orders above NOK 1000,-. VAT not included. - Page 35 Terms 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier.
-
Page 36: Pixel Defect Policy
TFT display. Neither the production at LCD-supplier nor the use of a LCD-Monitor after shipment can be influenced by Hatteland Display. Hence Hatteland Display cannot be made responsible for such dot failures. -
Page 37: Notes
Notes General Notes: (For all products) - The unit is type approved according to EN60945 4 th , 4.4, equipment category b) protected from the weather. - Other type approvals applies for the different products. Please see the appropriate “Specifications” page in this manual for more information. - Use of brillance and Glass Display Control™... -
Page 38: Revision History
Revision History Rev. Date Notes 00-1 22 Feb 2012 Release for internal review. 07 Mar 2012 First official release. Appendix INB100535-2 (Rev 1) IND100077-120... - Page 39 Revision History Appendix INB100535-2 (Rev 1) IND100077-120...
- Page 40 w ww .hat tel and-di s p l ay . com...