Hatteland JH 19T01 MIL User Manual page 29

OSD Menu Functions
1 STATUS:
2
Selecting this function will display graphic information such as resolution and
frequency.
POSITION: (No function in DVI mode)
1
2
Selecting this function will enable the user to position the image within the display
4
3
area.
(No Function in DVI) IMAGE UP/DOWN
(No Function in DVI) IMAGE LEFT/RIGHT : Position the image horizontally using "+" or "-" buttons.
PICTURE IN PICTURE:
1
2
Selecting this function will enable the user to configure PIP window size, input signal
source, horizontal and vertical position and more.
PIP SIZE
PIP SOURCE
HORIZONTAL POSITION:
VERTICAL POSITION:
ADVANCED SETTINGS: (Click to enter sub-menu) - NOTE: Tint adjust not available for S-Video signals.
BRIGHTNESS:
CONTRAST:
SHARPNESS:
TINT:
COLOR:
ROTATION:
Selecting this function will enable the user to rotate the image to either
4
3
landscape (NORMAL) or portrait (ROTATED) format.
User Controls
IND100064-17
: Position the image vertically using "UP" or "DOWN" buttons.
: Select PIP window size. Adjustable in steps 0 (off) to 24.
: Select video source to be displayed in PIP window.
Available sources are:
AUTO = automatic detection of Composite or S-Video.
COMPOSITE = manual select composite video signal only.
SVIDEO = manual select S-Video signal only.
Adjust the position of the PIP window horizontally.
Adjust the position of the PIP window vertically.
Increase/decrease the image brightness of the PIP window.
Increase/decrease the image contrast of the PIP window.
Increase/decrease the image sharpness of the PIP window.
Increase/decrease the tint of the image of the PIP window.
Increase/decrease the color of the image of the PIP window.
29
INB100005-3 (Rev 9)