Physical Connections - MIL Models
POWER INPUT: (DC Version)
Secure the cables (check polarity!) to the screw terminal, you may secure the cable further by mounting it
to the base mounted cable tie clamp. The internal DC power module supports voltage from 12 to 24 VDC
depending on the product model. Please check specifications for your exact product/type number
elsewhere in this manual!
REMOTE CONTROL:
The two serial remote control connectors are used for displays with the JHSCOM-A1 or JHSCOM-B1. It
features a RS232/RS422/RS485 interface for controlling all parameters, including brightness, for the
display. For further information on usage, see the "Control Interface" section in this manual.
IND100133-6
INB100005-3 (Rev 9)