Table of Contents
Advertisement
Operation
USER CONTROLS:
The On Screen Display (OSD menu) controls are located under the metal hatch on the left side of the unit. To loosen it, use a
suitable screwdriver and dismount the two screws as illustrated in FIG 1. To begin understanding the workflow of the menu, follow
these steps for a quick start.
1: Press the "MENU" button. The OSD menu will show all the available functions you can adjust or control.
2: You can move to the next icon by pressing "MENU".
3: Select options within icon menu by pressing "UP" or "DOWN" buttons. The selected option will turn yellow.
4: Use "+" or "-" buttons to increase/decrease values.
5: Move the selection left or right by using "+" or "-" buttons. The selected option will turn green.
6: To confirm the selection, press "+" button. To abort press "-" button.
OSD MENU:
he On Screen Display (OSD menu) contains several functions that will let the user to adjust or setup the display to their preferred
T
setting. The functions are shown as easy understandable icons. Some of the menus have sub-menus, use "+" to access and
"MENU" to go back to the previous menu. The OSD menu consists of 4 modes: (Icon beside function indicates if it's available in
that mode)
1
Mode 1 - Available functions in RGB / DVI* MODE Simplified OSD Menu - (company logo will appear)
2
Mode 2 - Available functions in RGB / DVI* MODE Advanced OSD Menu - (no company logo will appear)
Mode - Available functions in VIDEO MODE Simplified OSD Menu - (company logo will appear)
3
Mode - Available functions in VIDEO MODE Advanced OSD Menu - (no company logo will appear)
4
*RGB/DVI MODE = When RGB/DVI signal (i.e OS or radar / charts) are displayed full screen.
*VIDEO MODE = When video signal (i.e CAMERA / VCR / DVD) are displayed full screen.
To access the "Advanced/Full" OSD Menu, you must press and hold the "DOWN" button while turning power on. When picture
appears, release the "DOWN" button and press "MENU" to access the "Advanced/Full" functions. If you have the "Memorized state"
version of the OSD menu, use the same procedure to switch between "Simplified/Normal" & "Advanced/Full" modes (also known
For more information about "Memorized state" and the different OSD menu modes, see the "NOTES" section in this manual.
WARNING !! ONLY A QUALIFIED SERVICE ENGINEER SHOULD ACCESS THE ADVANCED/SERVICE MENU.
Operation
IND100064-0
FIG 1
User can adjust the most common functions needed to operate the display.
*Some functions are not available in DVI mode.
User can access more advanced functions. (Service menu).
*Some functions are not available in DVI mode.
User can adjust the most common functions needed to operate the display.
User can access more advanced functions. (Service menu).
as NORMAL/TOGGLE).
PERFORMANCE OF THE DISPLAY MAY BE SERIOUSLY AFFECTED!
MENU Access Button
25
INB100005-3 (Rev 9)
UP/Down Buttons
Adjust Buttons -/+
Advertisement
Table of Contents
