Additional Commands - Hatteland JH 19T01 MIL User Manual

Serial Communication (SCOM) Interface
the display shall ignore the message. A NAK message shall not be generated.
If the data checksum is valid, but the value in the DATA field associated with a command is invalid
(out of range, undefined, etc.), the Display shall generate a NAK message indicating the current
data value in the DATA field.
Additional Commands
In time, additional commands and corresponding data fields may be defined. These additions will
not conflict with the operation of the interface as defined herein.
Communication Interface 75
INB100005-3 (Rev 9)
IND100084-1