Table of Contents
Advertisement
Installation
Fit Appliance into Framing
1. Remove the screws retaining the engine to its pallet.
2. Taking great care not to cut your hands on the sheet
metal edges, lift the appliance away from its packing
base and place it in the framing. Make sure that
the unit is at the right height with consideration to the
height of the hearth or combustible fl ooring.
3. Fold out the 6 mounting tabs (3 front, 3 rear) and
recess the appliance in the framing as shown.
4. Fasten the unit to framing using 3 screws or nails at
the mounting tabs on the front and rear.
Note: The sheet metal front face of the appliance is
fl ush with the framing studs.
Appliance Preparation
27
Advertisement
Table of Contents
