Table of Contents
Advertisement
Installation
5. Place log 3720 in the center of the fi rebox, at the
rear. Note there are two holes for the left peg of this
log.
Natural gas: Place the log's left peg in the front hole.
Propane gas: Place the log's left peg in the rear hole.
2965
2967
6. Place log 2939 onto the pin on top of 3720 and
across the burner to the front of the platform.
2965
2967
IMPORTANT: Use only the vermiculite provided with
your Valor fi replace The use of any other types of ma-
terial may void your fi replace warranty.
2965
2967
Driftwood Kit installed
3720
PG
3720
2939
3720
7. Place log 2966 with the two pins in the holes in the
platform.
3720
8. Carefully spread the vermiculite on the burner and
the surrounding platform. Do not pour too much to
avoid blocking the burner ports.
NG
NOTE: Ensure the area within the pilot shield is clear
of vermiculite.
9. Place the pebbles around the burner to preference.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of vermiculite pieces as
these could be ingested by small children.
Vacuum area after installation.
2939
2939
Pilot
Fuel Beds
2966
2966
39
Advertisement
Table of Contents
