Table of Contents
Advertisement
Installation
Birch Log Kit 1505BLKV2
Material Required
• Steel platform (supplied with fi replace)
• 1505BLKV2 Birch Log Kit, which contains :
• 8 logs
• 1 bag of embers (6 cup bag)
L30
L2
L12
L1
• Gloves, if desired
L31
L6
L32
L4
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on other logs.
Install the logs as follows.
1. Install the steel platform around the burner as
indicated. The openings in the platform should be
underneath.
Installed platform
2. Place log L30 with the pin inserted in the hole as
shown. Put the other end of the log on the pilot
shield.
L30
3. Place log L2 with the pin inserted in the hole in L30
as shown, across the burner to the front of the
media platform.
L2
L30
Fuel Beds
35
Advertisement
Table of Contents
