Specifications - ICP DAS USA I-2533CS-FD User Manual

1.1. Specifications

Model Name
CAN Interface
Transceiver
Channel Number
Connector
Transmission Speed
Terminal Resistor
Isolation
Specification
CAN Filter
Configuration
Receive Buffer
Fiber Interface
Type
Wave Length (nm)
Fiber Cable (μm)
Transmission Distance
(km)
Min. TX Output (dBm)
Max. TX Output (dBm)
Max. RX Sensitivity
(dBm)
Max. RX Overload
(dBm)
Budget (dBm)
USB Interface
Connector
Compatibility
Software Driver
LED
I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
I-2533CS-FD
TI TCAN1042HG
3-pin terminal-block connector
CAN bit rates: 10 ~ 1000 kbps,
CAN FD bit rates for data field: 100 ~ 10000 kbps
DIP switch for the 120 Ω terminal resistor
3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
ISO 11898-2, CAN 2.0 A/B and FD
Selectable via Utility tool
128 data frames
SC type ; Single mode ; 100 Base-FX
8.3/125, 8.7/125, 9/125 or 10/125
30 (theoretical value)
1 x USB (Mini-B)
USB 2.0 High Speed (480Mbps)
Built-in Windows 7/8.1/10
1
1310
-15
-8
-34
-5
19
Page: 7