1. Introduction
The I-2533CS-FD is a local CAN/CAN FD (CAN with Flexible Data-Rate) bridge
used to establish a connection between two CAN bus system via single mode fiber optic
transmission medium. In order to solve the problem between CAN/CAN FD and fiber
transmission medium, the I-2533CS-FD is specially designed for converting the
electrical CAN/CAN FD bus signal to fiber optic cables. Besides, I-2533CS-FD has
three more important features.
First, the transmission distance limitation of the CAN bus system will not affected
due to the different CAN/CAN FD baud rate. It means that the total CAN/CAN FD bus
working distance can be extended. Second, the bus error on one CAN/CAN FD network
will not affect the operation of another CAN/CAN FD network. Finally, the two CAN/CAN
FD network can communication with each other by using different CAN/CAN FD baud
rate for highly flexibility.
The I-2533CS-FD is designed for single mode fiber, and allow to extern CAN/CAN
FD bus to maximum 30 km. Besides, I-2533CS-FD provides the group function, which
is the basic message router. Users can decide the CAN/CAN FD message flows
between several CAN/CAN FD bus systems. I-2533CS-FD also provides the utility tool
for user-defined baud rate and filter configuration. By using this tool, it is allowed to
have user-defined baud rate and CAN/CAN FD message filter. When users use the
I-2533CS-FD on two CAN/CAN FD network with different CAN baud rate, it may be
useful to reduce the bus loading of the network which has low baud rate.
I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Page: 5