Advertisement
i
-8000
Default firmware features
Supports Modbus/TCP communication protocol to access I/Os that plugged
in slots.
Supports VxComm technique for every COM port of controllers.
Supports 8K and 87K DI/DO/AI/AO modules.
Please refer detail list in Modbus Utility on-line help.
Automatically scan I/O modules.
You can plug I/O modules in any slot. Don't mind the slot order, it doesn
mater
Allowed a maximum of 8 host PCs access simultaneously.
In fact, it can allow 16 host PCs access simultaneously.
But for getting better stability, we recommend you don't use more than 8 host
PCs to access a Modbus/TCP controller.
Firmware updateable
Modbus SDK ( in C language )
We provide Modbus SDK to users. You can use it to integrate several serial
devices. Thus the controller can be a Modbus/TCP slave and Modbus/RTU
master. The Modbus SDK has below features:
Supports extra user-defined command protocol
Register based programming method (easy to use)
Can link Modbus/RTU slave devices
Supports user-defined registers
Can link to non-standard serial devices
Xserver SDK compatible
Hardware specifications
Same as I-8430, I-8431, I-8830, I-8831
Ordering Information
I-8430 -MTCP: Modbus/TCP PAC with 4 slots
I-8431 -MTCP: Modbus/TCP PAC with 4 slots
I-8830 -MTCP: Modbus/TCP PAC with 8 slots
I-8831 -MTCP: Modbus/TCP PAC with 8 slots
Modbus/TCP PAC
SERIES
3-10
Advertisement
