Configure Can Id Filter - ICP DAS USA I-2533CS-FD User Manual

4.3.5.

Configure CAN ID Filter

By using the I-2533CS-FD Utiltiy tool, user can configure the CAN ID filter of the
module.
The "Reject Remote Frame" is used to reject remote standard/extended CAN frame.
And the "Standard ID/Extended ID" field are used to set accepted standard/extended
CAN IDs. All settings in the "CAN Filter Setting" will take effect after pressing "Re-Init
CAN" button.
[Reject Remote Frame] block:
<1> "Set" button:
Checking the "Reject Remote Standard/Extended Frame" item to select
whether reject remote standard/extended CAN frame or not. After checking the
"Reject Remote Frame", press the "Set" button to save the setting into module.
I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Page: 34